CA060 v4 250mm
Maximal Wheelsize: 60mm flat wheelbase 250mm
Be aware: They come with a natural rocker
These are made for the 50/50 Core System
make sure to drill the axleholes with a 10mm drill to get rid of extra material
the spacers that come with the core are a tight fit and the print tends to shrink a bit.
Printing Technique:
PLA+ (Print em upside down if they bend during the print)
Length: 277.6mm
Height: 50mm
Width: 46mm
Try to find a 3D Printing Vendor in your area (google is your friend)
Otherwise use one of these services.
https://www.shapeways.com/
https://i.materialise.com/en
STL Print File:
Right click and save as....
All designs are made for personal use only.
We take no responsibility if they fail or break. Print at your own risk.