The New st0 v02
so far i made one for the Salomon 24.5 shell.
It might be necessary to shave a little bit from the outside of the nubs,
if your skate is unused.
Always check the dimensions and scale
width = 113mm
height = 27.5mm
Length = 264.3mm
these might work better on a FDM printer but MJF or SLS is still superiour
Dropbox link - right-click and download
Order prints at
https://i.materialise.com/en
All designs are made for personal use only.
We take no responsibility if they fail or break. Print at your own risk.